

RAM Mounts Cable Manager with AMPS Hole Pattern (RAP-403U) is made for drill-down bases with a 66.7 mm (2 5/8") round plate and the 4-hole AMPS pattern – the smaller sibling of RAP-402U. Fitted under the base, it covers the hole drilled for the wiring and passes the cable out through a 14.2 × 17.8 mm side slot. Four long #10-24 screws come with it, for decks and panels up to 17.3 mm (0.68") thick.
Only need the spacer for a flush holder? Order the spacer plate on its own. For a ready-made marine base with this cable manager, see the drill-down marine electronic mount with cable manager.
Key Features
- Tidy cable route – the base covers the cable hole and a 14.2 × 17.8 mm (0.56" × 0.7") slot takes the cable out sideways
- Matches AMPS drill-down bases – 4-hole AMPS pattern, 30 × 38 mm (1.181" × 1.496")
- Kinder to boat surfaces – glass-filled nylon between base and deck reduces vibration and protects fibreglass and gel-coat
- Fixing kit included – 4× #10-24 x 2" machine screws, 4× nyloc nuts and 4× #10 fender washers
- Built on the RAP-403FU – the same composite spacer RAM sells separately, here with hardware
Compatibility
- RAM drill-down bases with a 66.7 mm (2 5/8") round plate and 4-hole AMPS pattern
- Mounting surfaces up to 17.3 mm (0.68") thick with the supplied screws
- For 93.5 mm (3.68") 3-hole plates use RAP-402U
Technical Specifications
| Part Number | RAP-403U |
|---|---|
| Kit Contents | RAP-403FU spacer plate, mounting hardware |
| Hole Pattern | AMPS 4-hole 30 × 38 mm (1.181" × 1.496") |
| Cable Slot | 14.2 × 17.8 mm (0.56" × 0.7") |
| Max. Surface Thickness | 17.3 mm (0.68") with the included screws |
| Materials | Glass-filled nylon (high-strength composite) |
| Mounting Type | Drill-down |
| Weight | 0.11 kg (0.25 lb) |
| In the Box | Cable manager, 4 screws, 4 nyloc nuts, 4 fender washers |
Wiring up consoles on a series of boats? We are an Official RAM Mounts Reseller and can deliver AMPS cable managers with the drill-down bases they belong under.
Complete RAM mounts with this part (1)
Every complete mount below includes this part.
Questions about RAP-403U
Which bases does RAP-403U fit?
Drill-down bases with a 66.7 mm (2 5/8") round plate and the 4-hole AMPS pattern (30 × 38 mm). Larger 93.5 mm plates with three holes need RAP-402U.
How is it different from RAP-403FU?
RAP-403FU is the spacer alone. RAP-403U adds four #10-24 x 2" screws, nyloc nuts and fender washers for a drill-down installation.
Anything to watch during assembly?
Put a drop of oil on each thread first; RAM recommends this to stop the screws and nuts from galling.
Recently Viewed
Don't forget! The products that you viewed. Add it to cart now.
People Also Bought
Here’s some of our most similar products people are buying. Click to discover trending style.
