

RAM Mounts Stack-N-Stow Bait Board (RAP-395U) is a 254 × 330 mm (10" × 13") composite work tray for cutting bait and rigging, with built-in magnets that keep a knife, hooks and lures where you left them. This is the board on its own: the underside carries a 4-hole AMPS pattern for a RAM ball plate, and it also accepts 25.4 mm (1") pipes and extension poles. When a fish bites, loosen the knob, swing the board aside and lock it again.
To mount it on a rail, screw a C-size round plate to the AMPS holes and join it with a C-size arm to a Tough-Claw large clamp. A Level Cup drink holder hooks onto the side; the board with a spline post is RAP-395-PU.
Key Features
- Tools stay put – two rare-earth magnets (RAM-HC1-MAGU) hold a knife, hooks, lures or any other steel item
- Hang and clip – built-in points for tools, lures and clippers, plus mounting points for a GoPro camera and cup holders
- Mounts on a RAM ball – 4-hole AMPS pattern, 30 × 38 mm (1.181" × 1.496"), on the underside for a RAM round plate
- Pipe and pole ready – accepts 25.4 mm (1") pipes and extension poles
- Swings out of the way – loosen the knob to rotate the board aside, tighten it to hold the new position
Compatibility
- RAM round ball plates and other parts with the 4-hole AMPS pattern (30 × 38 mm)
- Pipes and extension poles 25.4 mm (1") in diameter
- Stack-N-Stow accessories: Level Cup drink holder, Wedge-Lock ball base, B- and C-size ball adapters
Technical Specifications
| Part Number | RAP-395U |
|---|---|
| Tray Dimensions | 254 × 330 mm (10" × 13"), 41 mm (1.625") deep |
| Hole Pattern | 4-hole AMPS, 30 × 38 mm (1.181" × 1.496") |
| Magnets | 2 rare-earth magnets (RAM-HC1-MAGU) |
| Hardware | 4× #10-24 x 3/4" sheet metal screws |
| Materials | High-strength composite |
| Weight | 0.79 kg (1.75 lb) |
| In the Box | Bait board with rare-earth magnets, 4 sheet metal screws |
Setting up guide boats or a tackle shop's rental kayaks? As an Official RAM Mounts Reseller we supply Stack-N-Stow boards with whichever base suits each boat.
Complete RAM mounts with this part (2)
Every complete mount below includes this part.
Questions about RAP-395U
Does RAP-395U include a post or base?
No, it is the board with its magnets and four #10-24 screws. With a spline post it is RAP-395-PU; complete deck and rail kits are RAP-395-BMPU and RAP-395-RMU.
How do I put it on a RAM ball mount?
Screw a RAM round plate with the 4-hole AMPS pattern (30 × 38 mm) to the underside, then connect it through a double socket arm to a RAM ball base.
Can it sit on a pole?
Yes, the board takes pipes and extension poles 25.4 mm (1") in diameter.
Recently Viewed
Don't forget! The products that you viewed. Add it to cart now.
People Also Bought
Here’s some of our most similar products people are buying. Click to discover trending style.

