

What's in the box – RAP-400-202U
RAM Mounts Tough-Claw Trolling Motor Stabilizer (RAP-400-202U) stops a stowed trolling motor shaft from bouncing around while the boat runs on its main engine. The round base is screwed to the deck, and the small Tough-Claw closes on the shaft with a hand knob – then opens again in seconds when it is time to fish.
For more distance between deck and shaft, the long-arm version or a long C-size arm gives extra reach. Shaft thicker than 29 mm? The large Tough-Claw fits the same arm.
Key Features
- Holds the shaft still – the small Tough-Claw grips shafts and tubes 15.9–29 mm (0.625"–1.14") across on rubber pads
- Fixed point on deck – the Ø 63.5 mm (2.5") round base is screwed down using the AMPS 4-hole or 3-hole pattern
- Medium reach – 118.4 mm (4.66") socket to socket between deck and claw
- Releases by hand – no tools needed to lock or free the motor
- Built for the water – powder-coated marine-grade aluminium and high-strength composite
Compatibility
- Trolling motor shafts 15.9–29 mm (0.625"–1.14") in outer diameter
- Flat decks and surfaces where the round base can be screwed down
- All RAM C-size (38.1 mm / 1.5") arms
Technical Specifications
| Part Number | RAP-400-202U |
|---|---|
| Kit Contents | RAP-400U small Tough-Claw, RAM-201U medium arm, RAM-202U round plate |
| Ball Size | C, 38.1 mm (1.5") |
| Arm | Medium, 118.4 mm (4.66") socket to socket |
| Clamp Range | 15.9–29 mm (0.625"–1.14") |
| Base | Ø 63.5 mm (2.5") round plate; AMPS 4-hole 30 × 38 mm; 3-hole 120° Ø 46 mm |
| Load Capacity | 1.8 kg (4 lb) standard use; 1.36 kg (3 lb) heavy-duty use |
| Materials | Marine-grade aluminium, high-strength composite |
| Mounting Type | Drill-down base, rail clamp |
| Weight | 0.60 kg (1.32 lb) |
| In the Box | Small Tough-Claw base, medium double socket arm, round plate with ball |
Rigging several fishing boats or running a boat rental fleet? As an Official RAM Mounts Reseller we supply stabilizers and spare parts in quantity and quote volume pricing.
Questions about RAP-400-202U
What shaft size does it fit?
The small Tough-Claw takes shafts from 15.9 to 29 mm (0.625"–1.14"). For thicker shafts, RAM makes the same stabilizer with the medium claw (25.4–40.6 mm).
Do I need to drill the boat?
Yes, the round base is screwed down. For a no-drill setup, RAM's RAP-404-404U has a Tough-Claw at both ends and clamps to a rail instead.
Does the claw scratch the shaft?
The jaws have rubber pads that grip the shaft and protect its surface.
Recently Viewed
Don't forget! The products that you viewed. Add it to cart now.
People Also Bought
Here’s some of our most similar products people are buying. Click to discover trending style.


