Saatavilla olevat versiot
RAM-GDS-DOCK-D14-U1C
IntelliSkin Hard Case
simply press the lever to release the tablet.For the docking station to function
The RAM Mounts GDS Uni-Conn docking station is a free-standing dock designed for devices enclosed in an IntelliSkin Next-Gen, IntelliSkin Hard Case, or IntelliSkin Thin-Case with a mounted GDS Uni-Conn adapter.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the compatible IntelliSkin protective sleeve.Product features RAM-GDS-DOCK-D14-U1C:Only compatible with IntelliSkin & Uni-Conn adapterSnap-In functionEasy insertion and removalCharging functionOutput Voltage: 5-20V @ 3A maxPower Output: 60W maxInput Connector: USB-CInput Cable Length: ca. 150 cmIncludes 1m USB-C 2.0 cableProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 2.83 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-D14-U1C is supplied.
RAM-GDS-DOCK-D14-U1C-2A
IntelliSkin Hard Case
mouse
scanner gun
simply press the lever to release the tablet.For the docking station to function
The RAM Mounts GDS Uni-Conn docking station is a free-standing dock designed for devices enclosed in an IntelliSkin Next-Gen, IntelliSkin Hard Case, or IntelliSkin Thin-Case with a mounted GDS Uni-Conn adapter.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection while the two USB-A ports on the back support up to two input devices like keyboard, mouse, scanner gun, and more.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the compatible IntelliSkin protective sleeve.Product features RAM-GDS-DOCK-D14-U1C-2A:Only compatible with IntelliSkin & Uni-Conn adapterSnap-In functionEasy insertion and removalCharging functionOutput Voltage: 5-20V @ 3A maxPower Output: 60W maxInput Connector: USB-C / 2x USB-A (Pheripheral)Input Cable Length: ca. 150 cmIncludes 1m USB-C 2.0 cableProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 2.89 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-D14-U1C-2A is supplied.
RAM-GDS-DOCK-D14-U1C-2A-GRY
Valittu
IntelliSkin Hard Case
mouse
scanner gun
simply press the lever to release the tablet.For the docking station to function
The RAM Mounts GDS Uni-Conn docking station is a free-standing dock designed for devices enclosed in an IntelliSkin Next-Gen, IntelliSkin Hard Case, or IntelliSkin Thin-Case with a mounted GDS Uni-Conn adapter.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection while the two USB-A ports on the back support up to two input devices like keyboard, mouse, scanner gun, and more.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the compatible IntelliSkin protective sleeve.Product features RAM-GDS-DOCK-D14-U1C-2A-GRY:Only compatible with IntelliSkin & Uni-Conn adapterSnap-In functionEasy insertion and removalCharging functionOutput Voltage: 5-20V @ 3A maxPower Output: 60W maxInput Connector: USB-C / 2x USB-A (Pheripheral)Input Cable Length: ca. 150 cmIncludes 1m USB-C 2.0 cableProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 2.89 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-D14-U1C-2A-GRY is supplied.
422,51 €Loppu varastosta
RAM-GDS-DOCK-D14-U1C-GRY
IntelliSkin Hard Case
simply press the lever to release the tablet.For the docking station to function
The RAM Mounts GDS Uni-Conn docking station is a free-standing dock designed for devices enclosed in an IntelliSkin Next-Gen, IntelliSkin Hard Case, or IntelliSkin Thin-Case with a mounted GDS Uni-Conn adapter.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the compatible IntelliSkin protective sleeve.Product features RAM-GDS-DOCK-D14-U1C-GRY:Only compatible with IntelliSkin & Uni-Conn adapterSnap-In functionEasy insertion and removalCharging functionOutput Voltage: 5-20V @ 3A maxPower Output: 60W maxInput Connector: USB-CInput Cable Length: ca. 150 cmIncludes 1m USB-C 2.0 cableProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 2.83 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-D14-U1C-GRY is supplied.
RAM-GDS-DOCK-D14-U1E
IntelliSkin Hard Case
simply press the lever to release the tablet.For the docking station to function
The RAM Mounts GDS Uni-Conn docking station is a free-standing dock designed for devices enclosed in an IntelliSkin Next-Gen, IntelliSkin Hard Case, or IntelliSkin Thin-Case with a mounted GDS Uni-Conn adapter.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a Power over Ethernet (PoE) connection over a RJ45 port.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the compatible IntelliSkin protective sleeve.Product features RAM-GDS-DOCK-D14-U1E:Only compatible with IntelliSkin & Uni-Conn adapterSnap-In functionEasy insertion and removalCharging functionOutput Voltage: USB PD 3.0 - 5V @ 3A / 9V @ 2.2A / 12V @ 1.67APower Output: 24W maxTransfer Speed: 10/100MbpsInput Connector: JST Male ConnectorInput Cable Length: ca. 150 cmIncludes RAM PoE to PD Charging ModuleProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 2.85 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-D14-U1E is supplied.
RAM-GDS-DOCK-D14-U1E-2A
IntelliSkin Hard Case
mouse
scanner gun
simply press the lever to release the tablet.For the docking station to function
The RAM Mounts GDS Uni-Conn docking station is a free-standing dock designed for devices enclosed in an IntelliSkin Next-Gen, IntelliSkin Hard Case, or IntelliSkin Thin-Case with a mounted GDS Uni-Conn adapter.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a Power over Ethernet (PoE) connection over a RJ45 port while the two USB-A ports on the back support up to two input devices like keyboard, mouse, scanner gun, and more.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the compatible IntelliSkin protective sleeve.Product features RAM-GDS-DOCK-D14-U1E-2A:Only compatible with IntelliSkin & Uni-Conn adapterSnap-In functionEasy insertion and removalCharging functionOutput Voltage: USB PD 3.0 - 5V @ 3A / 9V @ 2.2A / 12V @ 1.67APower Output: 24W maxTransfer Speed: 10/100MbpsInput Connector: JST Male Connector / 2x USB-A (Pheripheral)Input Cable Length: ca. 150 cmIncludes RAM PoE to PD Charging ModuleProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 2.95 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-D14-U1E-2A is supplied.
RAM-GDS-DOCK-D14-U1E-2A-GRY
IntelliSkin Hard Case
mouse
scanner gun
simply press the lever to release the tablet.For the docking station to function
The RAM Mounts GDS Uni-Conn docking station is a free-standing dock designed for devices enclosed in an IntelliSkin Next-Gen, IntelliSkin Hard Case, or IntelliSkin Thin-Case with a mounted GDS Uni-Conn adapter.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a Power over Ethernet (PoE) connection over a RJ45 port while the two USB-A ports on the back support up to two input devices like keyboard, mouse, scanner gun, and more.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the compatible IntelliSkin protective sleeve.Product features RAM-GDS-DOCK-D14-U1E-2A-GRY:Only compatible with IntelliSkin & Uni-Conn adapterSnap-In functionEasy insertion and removalCharging functionOutput Voltage: USB PD 3.0 - 5V @ 3A / 9V @ 2.2A / 12V @ 1.67APower Output: 24W maxTransfer Speed: 10/100MbpsInput Connector: JST Male Connector / 2x USB-A (Pheripheral)Input Cable Length: ca. 150 cmIncludes RAM PoE to PD Charging ModuleProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 2.88 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-D14-U1E-2A-GRY is supplied.
RAM-GDS-DOCK-D14-U1E-GRY
IntelliSkin Hard Case
simply press the lever to release the tablet.For the docking station to function
The RAM Mounts GDS Uni-Conn docking station is a free-standing dock designed for devices enclosed in an IntelliSkin Next-Gen, IntelliSkin Hard Case, or IntelliSkin Thin-Case with a mounted GDS Uni-Conn adapter.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a Power over Ethernet (PoE) connection over a RJ45 port.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the compatible IntelliSkin protective sleeve.Product features RAM-GDS-DOCK-D14-U1E-GRY:Only compatible with IntelliSkin & Uni-Conn adapterSnap-In functionEasy insertion and removalCharging functionOutput Voltage: USB PD 3.0 - 5V @ 3A / 9V @ 2.2A / 12V @ 1.67APower Output: 24W maxTransfer Speed: 10/100MbpsInput Connector: JST Male ConnectorInput Cable Length: ca. 150 cmIncludes RAM PoE to PD Charging ModuleProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 2.85 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-D14-U1E-GRY is supplied.
RAM-GDS-DOCK-D14-U3C
The RAM Mounts GDS Uni-Conn docking station is a free-standing dock designed for devices enclosed in an IntelliSkin Thin-Case with Rear Pogo Pads.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin Thin-Case protective sleeve and Rear Pogo Pads into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.Product features RAM-GDS-DOCK-D14-U3C:Only compatible with IntelliSkin Thin-Case (Rear Pogo Pads)Snap-In functionEasy insertion and removalCharging functionOutput Voltage: 5V-20V @ 3A max (USB-C Tablets)Power Output: 60W maxInput Connector: USB-CInput Cable Length: ca. 150 cmIncludes USB-C 2.0 CableProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 2.76 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-D14-U3C is supplied.
RAM-GDS-DOCK-D14-U3C-2A
mouse
scanner gun
The RAM Mounts GDS Uni-Conn docking station is a free-standing dock designed for devices enclosed in an IntelliSkin Thin-Case with Rear Pogo Pads.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection while the two USB-A ports on the back support up to two input devices like keyboard, mouse, scanner gun, and more.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin Thin-Case protective sleeve and Rear Pogo Pads into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.Product features RAM-GDS-DOCK-D14-U3C-2A:Only compatible with IntelliSkin Thin-Case (Rear Pogo Pads)Snap-In functionEasy insertion and removalCharging functionOutput Voltage: 5V-20V @ 3A max (USB-C Tablets)Power Output: 60W maxInput Connector: USB-C / 2x USB-A (Pheripheral)Input Cable Length: ca. 150 cmIncludes USB-C 2.0 CableProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 2.77 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-D14-U3C-2A is supplied.
RAM-GDS-DOCK-D14-U3C-2A-GRY
mouse
scanner gun
The RAM Mounts GDS Uni-Conn docking station is a free-standing dock designed for devices enclosed in an IntelliSkin Thin-Case with Rear Pogo Pads.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection while the two USB-A ports on the back support up to two input devices like keyboard, mouse, scanner gun, and more.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin Thin-Case protective sleeve and Rear Pogo Pads into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.Product features RAM-GDS-DOCK-D14-U3C-2A-GRY:Only compatible with IntelliSkin Thin-Case (Rear Pogo Pads)Snap-In functionEasy insertion and removalCharging functionOutput Voltage: 5V-20V @ 3A max (USB-C Tablets)Power Output: 60W maxInput Connector: USB-C / 2x USB-A (Pheripheral)Input Cable Length: ca. 150 cmIncludes USB-C 2.0 CableProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 2.67 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-D14-U3C-2A-GRY is supplied.
RAM-GDS-DOCK-D14-U3C-GRY
The RAM Mounts GDS Uni-Conn docking station is a free-standing dock designed for devices enclosed in an IntelliSkin Thin-Case with Rear Pogo Pads.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin Thin-Case protective sleeve and Rear Pogo Pads into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.Product features RAM-GDS-DOCK-D14-U3C-GRY:Only compatible with IntelliSkin Thin-Case (Rear Pogo Pads)Snap-In functionEasy insertion and removalCharging functionOutput Voltage: 5V-20V @ 3A max (USB-C Tablets)Power Output: 60W maxInput Connector: USB-CInput Cable Length: ca. 150 cmIncludes USB-C 2.0 CableColour - light grayProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 2.67 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-D14-U3C-GRY is supplied.
RAM-GDS-DOCK-D14-U3E
The RAM Mounts GDS Uni-Conn docking station is a free-standing dock designed for devices enclosed in an IntelliSkin Thin-Case with Rear Pogo Pads.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a Power over Ethernet (PoE) connection over a RJ45 port.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.Product features RAM-GDS-DOCK-D14-U3E:Only compatible with IntelliSkin Thin-Case (Rear Pogo Pads)Snap-In functionEasy insertion and removalCharging functionOutput Voltage: USB PD 3.0 - 5V @ 3A / 9V @ 2.2A / 12V @ 1.67APower Output: 24W maxTransfer Speed: 10/100MbpsInput Connector: JST Male ConnectorInput Cable Length: ca. 150 cmIncludes RAM PoE to PD Charging ModuleProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 2.78 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-D14-U3E is supplied.
RAM-GDS-DOCK-D14-U3E-2A
mouse
scanner gun
The RAM Mounts GDS Uni-Conn docking station is a free-standing dock designed for devices enclosed in an IntelliSkin Thin-Case with Rear Pogo Pads.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a Power over Ethernet (PoE) connection over a RJ45 port while the two USB-A ports on the back support up to two input devices like keyboard, mouse, scanner gun, and more.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.Product features RAM-GDS-DOCK-D14-U3E-2A:Only compatible with IntelliSkin Thin-Case (Rear Pogo Pads)Snap-In functionEasy insertion and removalCharging functionOutput Voltage: USB PD 3.0 - 5V @ 3A / 9V @ 2.2A / 12V @ 1.67APower Output: 24W maxTransfer Speed: 10/100MbpsInput Connector: JST Male Connector / 2x USB-A (Pheripheral)Input Cable Length: ca. 150 cmIncludes RAM PoE to PD Charging ModuleProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 2.83 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-D14-U3E-2A is supplied.
RAM-GDS-DOCK-D14-U3E-2A-GRY
mouse
scanner gun
The RAM Mounts GDS Uni-Conn docking station is a free-standing dock designed for devices enclosed in an IntelliSkin Thin-Case with Rear Pogo Pads.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a Power over Ethernet (PoE) connection over a RJ45 port while the two USB-A ports on the back support up to two input devices like keyboard, mouse, scanner gun, and more.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.Product features RAM-GDS-DOCK-D14-U3E-2A-GRY:Only compatible with IntelliSkin Thin-Case (Rear Pogo Pads)Snap-In functionEasy insertion and removalCharging functionOutput Voltage: USB PD 3.0 - 5V @ 3A / 9V @ 2.2A / 12V @ 1.67APower Output: 24W maxTransfer Speed: 10/100MbpsInput Connector: JST Male Connector / 2x USB-A (Pheripheral)Input Cable Length: ca. 150 cmIncludes RAM PoE to PD Charging ModuleProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 2.74 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-D14-U3E-2A-GRY is supplied.
RAM-GDS-DOCK-D14-U3E-GRY
The RAM Mounts GDS Uni-Conn docking station is a free-standing dock designed for devices enclosed in an IntelliSkin Thin-Case with Rear Pogo Pads.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a Power over Ethernet (PoE) connection over a RJ45 port.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.Product features RAM-GDS-DOCK-D14-U3E-GRY:Only compatible with IntelliSkin Thin-Case (Rear Pogo Pads)Snap-In functionEasy insertion and removalCharging functionOutput Voltage: USB PD 3.0 - 5V @ 3A / 9V @ 2.2A / 12V @ 1.67APower Output: 24W maxTransfer Speed: 10/100MbpsInput Connector: JST Male ConnectorInput Cable Length: ca. 150 cmIncludes RAM PoE to PD Charging ModuleColour - light grayProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 2.69 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-D14-U3E-GRY is supplied.
RAM-GDS-DOCKLR-D14-U1C
IntelliSkin Hard Case
simply press the lever to release the tablet.For the docking station to function
The RAM Mounts GDS Uni-Conn docking station with Key-Locking (Right) is a free-standing dock designed for devices enclosed in an IntelliSkin Next-Gen, IntelliSkin Hard Case, or IntelliSkin Thin-Case with a mounted GDS Uni-Conn adapter.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the compatible IntelliSkin protective sleeve.Product features RAM-GDS-DOCKLR-D14-U1C:Only compatible with IntelliSkin & Uni-Conn adapterSnap-In functionKey-LockingEasy insertion and removalCharging functionOutput Voltage: 5-20V @ 3A maxPower Output: 60W maxInput Connector: USB-CInput Cable Length: ca. 150 cmIncludes 1m USB-C 2.0 cableProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 2.84 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCKLR-D14-U1C is supplied.
RAM-GDS-DOCKLR-D14-U1C-2A
IntelliSkin Hard Case
mouse
scanner gun
simply press the lever to release the tablet.For the docking station to function
The RAM Mounts GDS Uni-Conn docking station with Key-Locking (Right) is a free-standing dock designed for devices enclosed in an IntelliSkin Next-Gen, IntelliSkin Hard Case, or IntelliSkin Thin-Case with a mounted GDS Uni-Conn adapter.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection while the two USB-A ports on the back support up to two input devices like keyboard, mouse, scanner gun, and more.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the compatible IntelliSkin protective sleeve.Product features RAM-GDS-DOCKLR-D14-U1C-2A:Only compatible with IntelliSkin & Uni-Conn adapterSnap-In functionKey-LockingEasy insertion and removalCharging functionOutput Voltage: 5-20V @ 3A maxPower Output: 60W maxInput Connector: USB-C / 2x USB-A (Pheripheral)Input Cable Length: ca. 150 cmIncludes 1m USB-C 2.0 cableProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 3.02 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCKLR-D14-U1C-2A is supplied.
RAM-GDS-DOCKLR-D14-U1C-2A-GRY
IntelliSkin Hard Case
mouse
scanner gun
simply press the lever to release the tablet.For the docking station to function
The RAM Mounts GDS Uni-Conn docking station with Key-Locking (Right) is a free-standing dock designed for devices enclosed in an IntelliSkin Next-Gen, IntelliSkin Hard Case, or IntelliSkin Thin-Case with a mounted GDS Uni-Conn adapter.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection while the two USB-A ports on the back support up to two input devices like keyboard, mouse, scanner gun, and more.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the compatible IntelliSkin protective sleeve.Product features RAM-GDS-DOCKLR-D14-U1C-2A-GRY:Only compatible with IntelliSkin & Uni-Conn adapterSnap-In functionKey-LockingEasy insertion and removalCharging functionOutput Voltage: 5-20V @ 3A maxPower Output: 60W maxInput Connector: USB-C / 2x USB-A (Pheripheral)Input Cable Length: ca. 150 cmIncludes 1m USB-C 2.0 cableProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 3.02 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCKLR-D14-U1C-2A-GRY is supplied.
RAM-GDS-DOCKLR-D14-U1C-GRY
IntelliSkin Hard Case
simply press the lever to release the tablet.For the docking station to function
The RAM Mounts GDS Uni-Conn docking station with Key-Locking (Right) is a free-standing dock designed for devices enclosed in an IntelliSkin Next-Gen, IntelliSkin Hard Case, or IntelliSkin Thin-Case with a mounted GDS Uni-Conn adapter.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the compatible IntelliSkin protective sleeve.Product features RAM-GDS-DOCKLR-D14-U1C-GRY:Only compatible with IntelliSkin & Uni-Conn adapterSnap-In functionKey-LockingEasy insertion and removalCharging functionOutput Voltage: 5-20V @ 3A maxPower Output: 60W maxInput Connector: USB-CInput Cable Length: ca. 150 cmProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 2.84 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCKLR-D14-U1C-GRY is supplied.
RAM-GDS-DOCKLR-D14-U1E
IntelliSkin Hard Case
simply press the lever to release the tablet.For the docking station to function
The RAM Mounts GDS Uni-Conn docking station with Key-Locking (Right) is a free-standing dock designed for devices enclosed in an IntelliSkin Next-Gen, IntelliSkin Hard Case, or IntelliSkin Thin-Case with a mounted GDS Uni-Conn adapter.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a Power over Ethernet (PoE) connection over a RJ45 port.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the compatible IntelliSkin protective sleeve.Product features RAM-GDS-DOCKLR-D14-U1E:Only compatible with IntelliSkin & Uni-Conn adapterSnap-In functionKey-LockingEasy insertion and removalCharging functionOutput Voltage: USB PD 3.0 - 5V @ 3A / 9V @ 2.2A / 12V @ 1.67APower Output: 24W maxTransfer Speed: 10/100MbpsInput Connector: JST Male ConnectorInput Cable Length: ca. 150 cmIncludes RAM PoE to PD Charging ModuleProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 2.94 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCKLR-D14-U1E is supplied.
RAM-GDS-DOCKLR-D14-U1E-2A
IntelliSkin Hard Case
mouse
scanner gun
simply press the lever to release the tablet.For the docking station to function
The RAM Mounts GDS Uni-Conn docking station with Key-Locking (Right) is a free-standing dock designed for devices enclosed in an IntelliSkin Next-Gen, IntelliSkin Hard Case, or IntelliSkin Thin-Case with a mounted GDS Uni-Conn adapter.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a Power over Ethernet (PoE) connection over a RJ45 port while the two USB-A ports on the back support up to two input devices like keyboard, mouse, scanner gun, and more.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the compatible IntelliSkin protective sleeve.Product features RAM-GDS-DOCKLR-D14-U1E-2A:Only compatible with IntelliSkin & Uni-Conn adapterSnap-In functionKey-LockingEasy insertion and removalCharging functionOutput Voltage: USB PD 3.0 - 5V @ 3A / 9V @ 2.2A / 12V @ 1.67APower Output: 24W maxTransfer Speed: 10/100MbpsInput Connector: JST Male Connector / 2x USB-A (Pheripheral)Input Cable Length: ca. 150 cmIncludes RAM PoE to PD Charging ModuleProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 3.04 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCKLR-D14-U1E-2A is supplied.
RAM-GDS-DOCKLR-D14-U1E-2A-GRY
IntelliSkin Hard Case
mouse
scanner gun
simply press the lever to release the tablet.For the docking station to function
The RAM Mounts GDS Uni-Conn docking station with Key-Locking (Right) is a free-standing dock designed for devices enclosed in an IntelliSkin Next-Gen, IntelliSkin Hard Case, or IntelliSkin Thin-Case with a mounted GDS Uni-Conn adapter.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a Power over Ethernet (PoE) connection over a RJ45 port while the two USB-A ports on the back support up to two input devices like keyboard, mouse, scanner gun, and more.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the compatible IntelliSkin protective sleeve.Product features RAM-GDS-DOCKLR-D14-U1E-2A-GRY:Only compatible with IntelliSkin & Uni-Conn adapterSnap-In functionKey-LockingEasy insertion and removalCharging functionOutput Voltage: USB PD 3.0 - 5V @ 3A / 9V @ 2.2A / 12V @ 1.67APower Output: 24W maxTransfer Speed: 10/100MbpsInput Connector: JST Male Connector / 2x USB-A (Pheripheral)Input Cable Length: ca. 150 cmIncludes RAM PoE to PD Charging ModuleProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 3.04 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCKLR-D14-U1E-2A-GRY is supplied.
RAM-GDS-DOCKLR-D14-U1E-GRY
IntelliSkin Hard Case
simply press the lever to release the tablet.For the docking station to function
The RAM Mounts GDS Uni-Conn docking station with Key-Locking (Right) is a free-standing dock designed for devices enclosed in an IntelliSkin Next-Gen, IntelliSkin Hard Case, or IntelliSkin Thin-Case with a mounted GDS Uni-Conn adapter.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a Power over Ethernet (PoE) connection over a RJ45 port.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the compatible IntelliSkin protective sleeve.Product features RAM-GDS-DOCKLR-D14-U1E-GRY:Only compatible with IntelliSkin & Uni-Conn adapterSnap-In functionKey-LockingEasy insertion and removalCharging functionOutput Voltage: USB PD 3.0 - 5V @ 3A / 9V @ 2.2A / 12V @ 1.67APower Output: 24W maxTransfer Speed: 10/100MbpsInput Connector: JST Male ConnectorInput Cable Length: ca. 150 cmIncludes RAM PoE to PD Charging ModuleProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 2.94 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCKLR-D14-U1E-GRY is supplied.
RAM-GDS-DOCKLR-D14-U3C
The RAM Mounts GDS Uni-Conn docking station with Key-Locking (Right) is a free-standing dock designed for devices enclosed in an IntelliSkin Thin-Case with Rear Pogo Pads.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin Thin-Case protective sleeve and Rear Pogo Pads into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.Product features RAM-GDS-DOCKLR-D14-U3C:Only compatible with IntelliSkin Thin-Case (Rear Pogo Pads)Snap-In functionKey-LockingEasy insertion and removalCharging functionOutput Voltage: 5V-20V @ 3A max (USB-C Tablets)Power Output: 60W maxInput Connector: USB-CInput Cable Length: ca. 150 cmIncludes USB-C 2.0 CableProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 2.74 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCKLR-D14-U3C is supplied.
RAM Mounts D14 series (RAM-GDS-DOCK-D14-U1C-2A-GRY) on ammattitason tarvike myyntipisteeseen valmistajalta RAM MOUNT, ja se on suunniteltu luotettavaan päivittäiseen käyttöön: vaativat yritysympäristöt. Osana RAM Mounts D14 series-tuoteperhettä se yhdistää valmistajan hyväksi todetun laadun ja helpon liitettävyyden nykyiseen järjestelmääsi.
Tärkeimmät tekniset tiedot
- Langallinen liitäntä: USB-C, USB
Tuote (tuotekoodi RAM-GDS-DOCK-D14-U1C-2A-GRY) on nopeasti toimitettavissa. Tutustu muihin malleihin kategoriassa Myyntipisteisiin tai kysy tiimiltämme neuvoa sopivimman RAM MOUNT-ratkaisun valintaan.
All Specifications
| Brand | RAM MOUNT |
|---|---|
| Model | RAM Mounts D14 series |
| SKU | RAM-GDS-DOCK-D14-U1C-2A-GRY |
| Product Type | Version |
| Minimum Order Quantity | 1 |
| Non Refundable | No |
| Non Returnable | No |
| Weight | 0.2 kg |
Avaa sivupalkki
Sivupalkki
Äskettäin katsotut
Älä unohda! Tuotteet, joita katselit. Lisää ne ostoskoriin nyt.
Muut ostivat myös
Tässä samankaltaisia tuotteita, joita muut ostavat. Klikkaa ja tutustu.